filling tube
英 [ˈfɪlɪŋ tjuːb]
美 [ˈfɪlɪŋ tuːb]
网络 填注管; 填料管
双语例句
- The filling process of mixture in the detonation tube is one important part of operation circle of PDE.
爆震室内混合物的填充过程是PDE工作循环中的重要一环。 - The CFG pile is the ground reinforcement one method, at present uses the vibration settling tube filling pile law and the long spiral core tube pump over blend pours into the pile two methods.
CFG桩属地基加固的一种方法，目前采用振动沉管灌注桩法和长螺旋芯管泵送混合料灌注成桩两种方法。 - This article analysis the sealing, tube holding and filling mechanism of existing tube filling and clos-ing machine.
详细分析了当前软管封尾机采用的封尾方式，软管固定方式和灌装机构等。 - It's a major machine in production line for oral liquid, it main used in filling, capping placing and sealing of straight tube bottle.
本机是口服液生产线中的灌装主机，主要用于易拉直管瓶的灌装、上盖、封口。 - The appropriate point on a frame is provided with a film level division filling device which comprises a feed pouring tube, a film guide plate, a location seat and a side baffle.
注料管一端与整流阀上的输出管相互衔接，其上适当处设有枢接座，导膜板可枢接于枢接座上； - The focal points of designing cyclone separator were involved in cylinder length, dimension of inlet and outlet pipe, cone and filling tube.
简体的长度、进气管和排气管的尺寸以及锥体和下料管是设计旋风分离器时要考虑的重点。 - The machine is suitable for automatically filling and sealing tooth paste, shoeshine, cosmetic, flexible tube drug and so on.
本机适用于牙膏、鞋油、化装品、药业等产品的自动包装。 - Study on Heat Transfer Enhancement by Filling Tube Inner Part with Two Layers of Porous Media
管中心填充两层多孔介质强化传热研究 - By means of theory calculating and analyzing, increasing steel ball section and reality filling up rate ( from 26% to 46%), raising tube body speed ( from 26.1r/min to 37.3r/ min), main bearing from sliding bearing changed ball-bearing are used.
通过理论计算与分析，采取了加大钢球（段）和实际充填率，由26%增加到46%；提高工作转速，由26.1r/min加快到37.3r/min； - Conclusion MLT could reduce complications of excessive air filling into tube cuff during long-term mechanical ventilation.
结论MLT可减少长期机械通气时气管导管气囊过度充气所致的并发症。 - Based on soil mechanics, the filling feature of unbonded sand at vibration molding has been studied, thus deriving a mathematical model to calculate the limiting filling height of the vertical tube by unbonded sand, the simulation results are in good agreement with the experiments.
本文基于土力学原理研究了干砂在振动造型中的充填特性，导出了型砂充填垂直管的极限填充高度的数学计算模型，并与实验值进行了对比验证。 - Before filling concrete in the arch rid, the main arch rid and cross linking system are pure steel structure. After filling concrete, the main arch rid is concrete filled steel tube structure.
主拱肋及横向联接系在拱肋未灌注混凝土前为完全钢结构，在灌注混凝土后及大桥运营阶段，主拱肋为钢管混凝土结构； - The red mud filling agent was put into the test tube and then solidified at 60 ℃ in a thermostat bath. After 72 hours, the intensity of anti-pressure of the concretion body can be as high as 1.61 MPa and is suitable for the oil-well filling agent.
赤泥充填料放置于试管中，在60℃的恒温槽中静置固化72小时，固结体抗压强度达1.61MPa，完全满足抗压强度要求。 - This paper analyses the fiber excess length control for filling loose tube on the secondary coating line.
本文就二次被覆设备在对光纤套塑的生产工艺过程中，生产充油的松管结构的光纤余长的控制技术进行了分析阐述。 - Dynamic Analysis on Filling Vertical Tube by Unbonded Sand in EPC
消失模铸造工艺干砂充填垂直管的动力学分析 - Irregular polypoid filling defect in cornua uteri and irregular shape of fallopian tube in 2 tubes, and hydrosalpinx at fimbria end in 1 tube.
2例子宫角部不规则息肉样充盈缺损阴影，输卵管管径不规则；另有1支表现为伞部轻度积水。 - The consolidation behavior of the sand drain ground during the process of filling the embankment was monitored by the settlement plate, telescoping tube settlement gauge and pore water pressure cell.
采用沉降板、分层沉降仪、孔隙水压力计等仪器，对路基分层填筑过程中砂井地基的固结规律进行监测，保证了路基的安全填筑。 - The natural frequency of the structure increases evidently after filling concrete, which certifies that it is reasonable for the rectangular steel tube truss to be partially filled with concrete.
填充混凝土后结构自振频率提高较明显，进一步说明部分填充混凝土矩形钢管桁架结构的合理性。